Showing 28–36 of 49 results
- 
		CRC QD CONTACT CLEANER1.General description Quick dry electronic cleaning solvent. 
 CRC QD-Contact Cleaner is a stable, inert, high-purity solvent cleaner, formulated for applications where
 lower flash point solvents may be used, and where sensitive plastics are involved. Based on very fast drying,
 hydrocarbon solvents without CFC’s, HCFC’s, chlorinated-, fluorinated-, alcohol- or glycol ether
 components. CRC QD-Contact Cleaner provides a suitable precision cleaning action for sensitive
 electronics and electrical equipment without risk of costly damage.2.Features • Quick drying. 
 • Effectively removes light contaminants, dust, dirt, finger prints, traces of light oil and moisture.
 • No ozone-depleting action (ODP = 0,00).
 • Reduces contact resistance, arcing and wear.
 • Extends the life of sensitive equipment.
 • Non-conductive and non-corrosive.
 • Leaves no residue.
 • Safe on commonly used plastics, rubbers and coatings.
 • Convenient 360° (upside-down) spray valve for aerosols.
 • High purity CO2 propellant, giving an active product content of 95 %
- 
		CRC ROBOSUREGeneral description 
 Maintenance for welding equipmentFeatures 
 • Excellent protection of welding robots and all surrounding equipment, against welding spatters.
 • An ideal alternative to traditional solvents and highly alkaline cleaning agents.
 • Protects metals and alloys.
 • Temporary conservation of metal parts during storage.
 • Non flammable.
 • Does not contain silicones.
 • Safe on all metal surfaces, does not stain.
 • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
 • Economical in use, due to the thin film performance.
 • Extended nozzle stand time and increased stability of the welding arc, ensuring free gas flow.
 • Inherently biodegradable.
- 
		CRC ROST FLASH1. General description Freezes and cracks rust. When 
 sprayed on the corroded surface,
 the oxides freeze (-40°C) and
 crack, leaving small fissures.
 The penetrating oil can now
 quickly penetrate through the
 cracks, providing an easy
 dismounting. CRC Rost Flash
 works on all kinds of surfaces
 when a movement is blocked by
 corrosion. Does not contain
 silicones or acids.2. Features • Cracks the layer of rust and dirt using thermal shock (reduces temperature to -40°C). 
 • Loosens metal parts seized by dirt, corrosion or dried-up grease.
 • Penetrates quickly.
 • Does not contain silicones.
 • Safe on all metal surfaces, does not stain.
 • Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
 • Convenient 360° (including inverted position) spray valve for aerosols.
- 
		CRC S.S KLEEN1. GENERAL DESCRIPTION CRC Inox Kleen is a water based, foaming cleaner for degreasing and cleaning shiny metal 
 surfaces. The product combines a high cleaning power with the application of a durable
 protective coating, in one step.2. FEATURES • Eliminates fingerprints, watermarks, dust and dirt from stainless steel. 
 • Leaves a protective non greasy barrier for a long term original aspect.
 • CRC Inox Kleen provides metal surfaces with a long term staining and contamination
 resistance.
 • Suitable for aluminum, stainless steel, chrome and most plastics (test prior to use).
 • No dilution is necessary.
 • Non corrosive.
 • Non-ozon depleting.
 • NSF registration : A7/C1 (registration number: 138083)
- 
		CRC SILICON SPREP SR MULTIGeneral description 
 SR Multi is a multi-purpose, medium duty, silicone mould release agent. It has been formulated as a highly effective, general purpose release agent for all thermoplastics, thermosets and many types of rubber.Features 
 Medium duty silicone release agent for thermoplastics, thermosets and rubbers.
 Excellent release slip.
 Improves surface finish.
 Reduces rejects and increases production.
 Does not build up in the mould.
 Operational up to 200°C.
 Wet film
- 
		CRC SMOKE TESTGENERAL DESCRIPTION 
 Smoke Detector Tester NF conveniently tests the functional ability of a smoke detector. Can
 be sprayed while standing on the floor eliminating the need to climb ladders or chairs. Ideal
 for residential or commercial detectors and is safe and easy to use. A short 3 second burst of
 the tester is all it takes. In addition, the tester checks for obstructions or debris which clog
 detector vents and prevent smoke from properly entering the sensing chamber. This
 important safety test is not accomplished by pushing a test buttonFEATURES 
 • Simulates Smoke. Provides a true, functional test for smoke detectors.
 • Aerosol Spray Extends User Reach up to 1,2 meter. Allows testing to be done while
 standing safely on the floor.
 • Convenient Package. Makes testing easy, increasing the likelihood that detectors will
 be tested on a regular basis.
 • No Harmful Residue. Smokeless aerosol assures that detectors will remain in proper
 working order after each test without build-up of carbon residue.
 • Plastic Safe. Will not damage plastic housing or internal circuitry.
 • Non-Staining. Will not discolor painted ceilings, walls or smoke detectors.
- 
		CRC SP 3501. GENERAL DESCRIPTION Long-term indoor corrosion inhibitor. CRC SP 350 II is a heavy-duty indoor corrosion inhibitor 
 providing extended protection for all metal parts and assemblies both in storage and during
 shipments. Its unique formulation, to resist run-off and flow, easily covers planed surfaces
 and sharp edges, making it particularly effective on precision machined surfaces.2. FEATURES • Heavy-duty corrosion protection up to 2 years indoors. 
 • Excellent long-term lubricant for metal parts subjected to heavy duty and constant wear.
 • Thin, non-drying penetrating and protecting film.
 • Displaces moisture.
 • Protects equipment and parts in storage, shipment and in process.
 • Promotes easy start-up.
 • Suited for all metals and alloys, included copper and brass.
 • Can be easily removed with solvent cleaners.
 • Equipped with the 360° (upside-down) spray valve for added convenience.
 • Pressurized with non-flammable CO2 propellant.
 • Active product content of 97 %.
- 
		CRC SP 400GENERAL DESCRIPTION Long-term outdoor and indoor corrosion inhibitor. 
 CRC SP 400 II is a long-term, outdoor and indoor corrosion inhibitor for machined surfaces
 and assemblies subjected to long periods of storage or adverse shipping conditions. The
 amber, dry, waxy film never becomes brittle and is highly resistant to humidity and severe
 corrosive atmospheres.FEATURES • Long-term protection (up to 2 years outdoors) for all metals during shipment or extended 
 storage.
 • Waxy film seals out moisture effectively. Highly resistant to humidity and salt spray.
 • Can be removed or diluted, for film thickness variation, with petroleum solvents.
 • Aerosols use hydrocarbon propellant for controlled application and film thickness.
- 
		CRC URETHANE ISOLATION RED1. GENERAL DESCRIPTION Clear or red one-component urethane type conformal coatings. 
 CRC Urethane Coats provides an air curing conformal urethane type coating that insulates
 electrical/electronic equipment, seals out water and moisture and acts as a barrier for
 contaminants. CRC Urethane Coats dry fast and adhere well. After curing they form a highly
 flexible film which is durable and resistant to abrasion and contaminants.2. FEATURES • Available in clear or red formulations: 
 – Clear: contains U.V.- fluorescent dye for easier quality control
 – Red: provides additional corrosion resistance
 • Dries quickly to a durable, flexible and non- conductive film.
 • Excellent electrical characteristics:
 – High dielectric strength
 – High surface and volume resistivity
 • Effective temperature range of – 40°C to + 120°C.
 • Abrasion-resistant insulator for electrical/electronic equipment and components.
 • Specifications : * NSN 5970-01-017-5738.
 
        
 
			 
			 
			 
			 
			 
			 
			 
			 
			