- Your cart is empty Browse Shop
Showing 10–18 of 49 results
-
CRC CHAIN LUBE
GENERAL DESCRIPTION
Gentle foaming action. Long lasting chain lubricant for use on food processing equipment
where incidental food contact may occur. Highly resistant to water wash off.The gentle foam
assures an excellent penetration and a non dripping action. Good load carrying capabilities
and corrosion prevention.FEATURES
• Formulated using only food grade acceptable components.
• Good adhesion on metal surfaces, even at elevated temperatures and high rpm.
• Excellent penetration and lubrication properties.
• Leaves a tenacious, long lasting lubricant film.
• Good load carrying properties.
• Reduces friction and wear.
• Resistant to water wash off.
• Prevents corrosion.
• Operating temperature from -15 °C to +175 °C.
• Contains PTFE.
• Virtually odourless and colourless.
• Aerosols are pressurized with non-flammable propellant, giving a gentle foaming action.
• NSF registration :H1 (registration number: 017046) -
CRC COPPER PASTE
1. GENERAL DESCRIPTION :
High temperature anti-seize lubricant.
CRC Copper Paste is a soft, copper-colored paste, based on micronized copper powder and
synergistic anti-oxidant, anti-corrosion and anti-wear additives suspended in a premium
grade stable oil.
It is an effective anti-seize formulation, preventing metal-to-metal contact, seizing, galling,
and fretting corrosion.2. FEATURES :
• Reduces friction and wear, even when the base oil has already evaporated.
• High pressure and high temperature resistance.
• Ensures accurate assembly.
• Enables easy disassembly of threaded parts, gaskets and flanges, even after long
operational periods.
• Threaded parts remain in good condition and can be re-used.
• Separating film ensures favorable release behaviour of the threaded connections.
• Excellent sealing even in corrosive atmospheres.
• Resistant to hot and cold water.
• Lead-free and nickel-free.
• Aerosol formulation does not contain chlorinated solvents and uses hydrocarbon
propellant. -
CRC CRICK SET
GENERAL DESCRIPTION
Quick drying solvent cleaner/degreaser and excess penetrant remover for the nondestructive testing of metal surfaces by liquid penetrant inspection.
Many cracks in engineering materials can be deep in spite of having a very small opening
width on the surface and can cause very serious defects. By normal visual inspection such
cracks may be very difficult to detect, but penetrant flaw detection is an extension of the
visual inspection method. The control is carried out using 3 products: Crick 110 (cleaner),
Crick 120 (penetrant) and Crick 130 (developer).
Crick 110 is a fast drying, powerful degreasing solvent blend free of 1,1,1-trichloroethane or
other chlorinated solvents for the removal of dirt, grime and contaminants. Designed for the
pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible,
colored traces of the penetrant. -
CRC DRY LUBE
General description
Dry, non greasy surface lubrication.Features
• Clean, dry and non-oily.
• Functional over a wide temperature range.
• Contains PTFE for extra lubricity.
• Produces a very low coefficient of friction.
• Most effective when low speeds and light loads are involved.
• High temperature resistance.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use -
CRC ECO COMPLEX BLUE
General Description:
Removes grease, oil, grime and tough stains from any washable surface (even floors and
walls) and from food processing equipment. Free of phosphate and EDTA.Features:
• “Readily” biodegradable per OECD 301B: 64%
• Quickly penetrates, removes grease, oil, grime and tough stains from any washable
surface.
• Effective in both cold and warm water.
• Excellent for use in pressure washer and steam cleaning equipment.
• Concentrated for convenience and economy.
• Can be diluted up to 1:100 to provide a single product for all cleaning needs.
• Contains no ammonia, chlorinated or petroleum solvents.
• Free of phosphate, EDTA and nonylphenolethoxylate.
• Safe on all metals.
• Safe on plastics, if rinsed after application.
• NSF registration : A1 (registration number: 111199)
• Approved by DGA – Technical Act 0820-10/DT/ASA/PFA of 09 September 2010. -
CRC ECO LEAK FINDER
1. General description
Detects and locates quickly and reliably
gas leaks in pressurized systems by
forming highly visible bubbles. Can be
used for natural gas, propane, butane,
acetylene, LPG, nitrogen, carbon
dioxide, compressed air, refrigerants,
oxygen and other types of gases.
Compatible with metals and plastics.
Biodegradable according to OECD
301B: 31%.2. Features
• Can be use for almost all types of gases.
• DVGW (Deutche Vereinigung des Gas- und Wasserfaches) approved according to DIN EN 14291:NG5170AS0069.
• Meets the requirements of MIL-L-25567 for oxygen compatibility. Testing of oxygen systems must be done
carefully and product residues should not be allowed to build up.
• Stable foam formulation.
• Non corrosive.
• Safe on all metal surfaces, does not stain.
• Convenient 360° (including inverted position) spray valve for aerosols. -
CRC FOOD GREASE
Section 1: General description
Reliable lubricating grease intended for use during general maintenance in the food processing
industry where incidental food contact may occur.
A non-toxic, high performance lubricant with good anti-corrosion properties.Section 2: Features
Equipped with the exclusive Perma Lock System
o Integrated short and long distance applicator.
o Secured spray straw can not get lost.
o The locked actuator can not detach or get lost.
o Green color actuator, indicating H1 Food Processing Safe.
Registered NSF class H1.
Operational over a most common temperature range.
Exceptional mechanical stability.
Resists steam.
Prevents corrosion.
Complies with BRC Global Standard (Issue 7) – 4.7.6. -
CRC FOOD LUBE
GENERAL DESCRIPTION
Gentle foaming action. Long lasting chain lubricant for use on food processing equipment
where incidental food contact may occur. Highly resistant to water wash off.The gentle foam
assures an excellent penetration and a non dripping action. Good load carrying capabilities
and corrosion prevention.FEATURES
• Formulated using only food grade acceptable components.
• Good adhesion on metal surfaces, even at elevated temperatures and high rpm.
• Excellent penetration and lubrication properties.
• Leaves a tenacious, long lasting lubricant film.
• Good load carrying properties.
• Reduces friction and wear.
• Resistant to water wash off.
• Prevents corrosion.
• Operating temperature from -15 °C to +175 °C.
• Contains PTFE.
• Virtually odourless and colourless.
• Aerosols are pressurized with non-flammable propellant, giving a gentle foaming action.
• NSF registration :H1 (registration number: 017046) -
CRC GALVA BRITE
1. General description:
Zinc, aluminum, anti corrosion
additives and a durable resin
provide optimal corrosion
protection. The weathering
aspect equals hot dip
galvanization, making it an
excellent touch up for damaged
galvanization.2. Features:
• Excellent touch-up for galvanised surfaces.
• Long term corrosion protection.
• Totally free of lead and chromates.
• None chlorinated solvents.
• Unique combination of flexibility and hardness providing an excellent adherence to the metal surface.
