Description
4. DIRECTIONS
• Shake aerosol can very well for at least one minute after agitator ball is free. Repeat
frequently while using.
• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a
wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat.
Additional coats can be applied after 5 minutes.
• When spraying is finished, clean aerosol valve by turning can upside down and press
button until only propellant escapes. If clogging occurs, remove button and clean orifice
with a fine wire.
• Do not use on energized equipment. Use in a well ventilated area.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC
products.
