- Your cart is empty Browse Shop
Showing all 9 results
-
CRC 2-26
1. General description
Maintains and protects all electrical
equipment. Displaces and seals out water
and moisture. Prevents corrosion and
oxidation. Penetrates and lubricates.2. Features
• Multi purpose fluid.
• Does not contain silicones.
• Protects metals and alloys.
• Displaces and seals out water and moisture.
• Loosens metal parts seized by dirt, corrosion or dried-up grease.
• Penetrates quickly.
• Safe on all metal surfaces, does not stain.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
• Convenient 360° (including inverted position) spray valve for aerosols.
• High purity CO2 propellant, giving an active product content of 95% -
CRC MINUS 45
1. General description
Coolant for electrical and electronic use. CRC MINUS 45 is a non-flammable (Directive 2008/47/EC), inert dry coolant spray for maintenance, trouble shooting and repair. Used to cool down parts and components; the tracking of intermittent faults, the detection of hairline cracks, and the locating of defective components becomes easier.
2. Features
Low Global Warming Potential (GWP)
Non-flammable (according to directive 2008/47/EC)
Protects heat sensitive components from high temperatures during soldering and de-soldering.
Facilitates precision fitting of metal parts: a short spray will shrink one part so a slip fit becomes
possible.
Saves maintenance cost and downtime.
No chemical attack of components.
Evaporates completely, leaving no residue.
Invaluable for testing thermostats and all systems responding to temperature changes. -
CRC POWER CONTACT CLEANER
1. General description
Exclusive cleaner for electrical equipment. A balanced solvent blend combined with an optimized spray power
provide an exceptionally fast and efficient cleaning. The superior wetting properties allow cleaning of most
contamination and offer a high compatibility with technical plastics.2. Features
• No ozone depleting action.
• Does not leave a residue.
• Non corrosive.
• Non conductive.
• Safe on all metal surfaces, does not stain.
• Safe on most rubbers, plastics and coatings. Test on sensitive or stressed materials before use.
• Convenient 360° (including inverted position) spray valve for aerosols.
• High purity CO2 propellant, giving an active product content of 95%. -
CRC QD CONTACT CLEANER
1.General description
Quick dry electronic cleaning solvent.
CRC QD-Contact Cleaner is a stable, inert, high-purity solvent cleaner, formulated for applications where
lower flash point solvents may be used, and where sensitive plastics are involved. Based on very fast drying,
hydrocarbon solvents without CFC’s, HCFC’s, chlorinated-, fluorinated-, alcohol- or glycol ether
components. CRC QD-Contact Cleaner provides a suitable precision cleaning action for sensitive
electronics and electrical equipment without risk of costly damage.2.Features
• Quick drying.
• Effectively removes light contaminants, dust, dirt, finger prints, traces of light oil and moisture.
• No ozone-depleting action (ODP = 0,00).
• Reduces contact resistance, arcing and wear.
• Extends the life of sensitive equipment.
• Non-conductive and non-corrosive.
• Leaves no residue.
• Safe on commonly used plastics, rubbers and coatings.
• Convenient 360° (upside-down) spray valve for aerosols.
• High purity CO2 propellant, giving an active product content of 95 % -
CRC SMOKE TEST
GENERAL DESCRIPTION
Smoke Detector Tester NF conveniently tests the functional ability of a smoke detector. Can
be sprayed while standing on the floor eliminating the need to climb ladders or chairs. Ideal
for residential or commercial detectors and is safe and easy to use. A short 3 second burst of
the tester is all it takes. In addition, the tester checks for obstructions or debris which clog
detector vents and prevent smoke from properly entering the sensing chamber. This
important safety test is not accomplished by pushing a test buttonFEATURES
• Simulates Smoke. Provides a true, functional test for smoke detectors.
• Aerosol Spray Extends User Reach up to 1,2 meter. Allows testing to be done while
standing safely on the floor.
• Convenient Package. Makes testing easy, increasing the likelihood that detectors will
be tested on a regular basis.
• No Harmful Residue. Smokeless aerosol assures that detectors will remain in proper
working order after each test without build-up of carbon residue.
• Plastic Safe. Will not damage plastic housing or internal circuitry.
• Non-Staining. Will not discolor painted ceilings, walls or smoke detectors. -
CRC URETHANE ISOLATION RED
1. GENERAL DESCRIPTION
Clear or red one-component urethane type conformal coatings.
CRC Urethane Coats provides an air curing conformal urethane type coating that insulates
electrical/electronic equipment, seals out water and moisture and acts as a barrier for
contaminants. CRC Urethane Coats dry fast and adhere well. After curing they form a highly
flexible film which is durable and resistant to abrasion and contaminants.2. FEATURES
• Available in clear or red formulations:
– Clear: contains U.V.- fluorescent dye for easier quality control
– Red: provides additional corrosion resistance
• Dries quickly to a durable, flexible and non- conductive film.
• Excellent electrical characteristics:
– High dielectric strength
– High surface and volume resistivity
• Effective temperature range of – 40°C to + 120°C.
• Abrasion-resistant insulator for electrical/electronic equipment and components.
• Specifications : * NSN 5970-01-017-5738. -
GRAPHIT 33
1. GENERAL DESCRIPTION
Graphite lacquer for conductive coatings. Thermoplastic binder with electrically conductive
graphite powder.2. FEATURES
• GRAPHIT 33 contains a high level of pure and fine graphite powder. This results in a good
electrical conductivity, as well as gliding and release agent properties of the graphite
lacquer. The coating exhibits good adhesion on metal, many plastics, glass and wood. -
KLI NIT
DESCRIPTION:
Lack of effective contact maintenance can affect relay panels in thermal power plants, affect the performance of signalling systems in railways, and cause pollution flashovers in high voltage insulators. Kli-nit Contact Cleaner removes oxidation, oil, and other contaminants of metal switches, motors, relays, generators, edge connectors, buss bars, circuit breakers, scales and sensors. Especially formulated to clean electrical equipment controls, ignition systems, motors, relays and thermostats, kli-nit contact cleaner will remove oil and grease and even moisture and dust particles that may be covering and impairing the contact points of electrical equipment.
BE 100% SURE
3
kli-nit CT-2 is not a lubricant and does not contain oils or other lubricants.
CT-2 NTACT CLEANER
Complies with MIL spec MIL-PRF 29608A
– Highly non-polar organic solvents for cleaning efficiency
– Dries quickly
-Does not contain oil or other harmful substances
-Complies with international packaging standards
Is environment friendly
-Thousands of satisfied customers & many performance certificatesAPPLICATIONS:
1 Railway- for cleaning of Interlock of all relays and BL limit switches of AC electric locos.
2. Power Plants- ELECTRICAL & ELECTRONIC CONTACTS, MOTORS, BREAKERS, ETC
2. printed circuit boards, electrical signals., controls, switches, precision instruments and electric panels
3. Airforce- Radars, communication systems, Information technology.
4. Used in electrical and electronic switchgear, equipment & components, electrical and electronic contacts, high pressure discharged equipment. -
PCB COATING PLASTIK 70
1. GENERAL DESCRIPTION
Quick drying, colourless transparent insulating and protective coating based on acrylic
resins.2. FEATURES
• PLASTIK 70 is a low viscosity, solvent drying acrylic based conformal coating with
excellent insulating properties. The lacquer is colourless transparent and elastic. It has a
durable adhesion in the temperature range from –40°C to +60°C and can be used for a
short period of time up to +100°C maximum. It protects printed circuit boards and
surfaces from humid anorganic-acid or caustic vapours.
• PLASTIK 70 is colourless-transparent and as such is not visual on the printed circuit
board surface.
• For repair works PLASTIK 70 can be soldered through or be totally removed with aceton,
THINNER FOR PLASTIK 70.
