Description
DIRECTIONS
• Heavy rust and scale (ferrous metals) : dilute concentrate with 3 parts water. Metal should
be immersed 20 minutes to 1 hour. Remove and rinse metal with water and treat
immediately with CRC 3-36 for water displacement and corrosion protection.
• Heavy corrosion (non-ferrous) : dilute concentrate with 7 to 10 parts water. Metal should
be immersed 20 minutes to 1 hour. Periodically check non-ferrous metals. Remove and
rinse with water. Treat immediately with CRC 3-36 for water displacement and corrosion
protection.
• As a metal cleaner (ferrous and non-ferrous) : dilute concentrate with 15 to 20 parts water.
Metal may be immersed, brushed or wiped until the desired brightness is obtained. Rinse
with water and treat immediately with CRC 3-36 for water displacement and corrosion
protection.
• Heating (up to 65°C max.), agitation or wiping will speed up cleaning action.
• Quicker results are obtained by prior removal of oil and grease, using CRC Industrial
Degreaser or CRC Fast Dry Degreaser.
• CRC Rust Remover is mildly acidic; therefore, reasonable care should be taken. Rubber
gloves and protective goggles are recommended.
• Equipment used must be made of acid resisting material such as stainless steel, wood,
rubber, plastic, glass or ceramic.
• A safety data sheet according EU directive 93/112 is available for all CRC products.


