Description
1. DIRECTIONS
When relative small amounts are involved, the easiest way to apply GRAPHIT 33 is to spray
from an aerosol can. Shake can thoroughly before use. Spray, from a distance of 20-30 cm
onto the dry and degreased surface. After use, always clean button by spraying upside-down
until only gas escapes.
When larger amounts are needed, GRAPHIT 33 can be applied by spraying using
commercial spray guns. Before use, stir vigorously (best for 10 minutes with propeller
agitator). As diluent we do recommend isopropanol e.g. our product THINNER for
KONTAFLON 85. During use, shake or stir at regular intervals.
The surface resistivity can be further reduced by heating at 90°C (1 hour) or by polishing with
a cloth or swab. Polishing makes also the weak graphite layer more firm. At temperatures
above 100°C the binding agent will decompose. Nevertheless a good adhering graphite film
remains that can be used as e.g. release coating.
