Description
3. Directions :
• Shake well before use.
• Shake until the agitator ball moves freely in the can.
• Apply to a clean, dry surface.
• Apply a thin even film.
• Best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15 – 20
minutes.
• Do not use on energized equipment.
• Do not use on sensitive electronic equipment.
• Clean the aerosol valve by turning the can upside down and spraying until only propellant escapes.
• A safety data sheet (MSDS) according to EC Regulation N° 1907/2006 Art.31 and amendments is available
for all CRC products.
